Certificaions
Alpha9 3000w Laser Hair Removal Machine
- Supports Rapid Mode with speeds up to 20Hz
- Supports Stack Mode for targeted, point-by-point removal of coarse, stubborn hair
- BTS function (enables facial brightening, tightening, and slimming)
- Single energy density control for intuitive parameter settings—no need for repeated adjustments
- AI analysis system based on big data, directly applicable to hair removal treatments
- Device self-diagnostic technology (for rapid troubleshooting of system faults)
- OTA (Over-the-Air) remote device updates
- Dynamic energy adjustment technology: automatically matches pulse width and energy based on energy density to ensure treatment safety
- Five interchangeable spot sizes
3 in 1 Hair Removal Machine
UNTLaser’s 3-in-1 hair removal machine combines three treatment modes: hair removal, skin rejuvenation, and SHR. In clinical practice, it allows for more precise treatment tailored to each client’s specific skin type and condition. For typical clients, you can use the diode laser directly to provide hair removal or skin rejuvenation services; for clients with a lower pain tolerance, you can use the SHR (Super Hair Removal) mode to deliver a more comfortable hair removal experience.
Compared to conventional single-technology hair removal devices, the 3-in-1 laser hair removal device offers greater flexibility in operation and skin type adaptation.
UNTLaser’s UltraPulse series 3-in-1 device also incorporates an AI system to assist practitioners in performing more precise procedures, enhancing your clinic’s professionalism and client trust.
Features of UNTLaser’s 3 in 1 Hair Removal Machine
A single device combines hair removal, skin rejuvenation, and SHR stacked mode.
The machine uses a three-wavelength diode laser: 808nm offers greater treatment comfort, 755nm is suitable for fine, soft hair, and 1064nm provides deeper penetration.
SHR mode ensures low-energy, high-frequency laser output, gradually heating the hair follicles through stacked pulses to enhance treatment comfort.
Our 3-in-1 hair removal machine supports network connectivity and automatic system updates. You can store data for different clients with unlimited storage capacity.
The treatment head moves with the body, allowing a single session to cover large body areas and ensuring treatment efficiency.
Supports four spot sizes: Φ6 mm, 15×15 mm, 15×20 mm, and 15×30 mm, which can be flexibly adjusted according to the treatment area.
The C³ System provides continuous compressor cooling for stable 24/7 operation, maintaining a handle temperature locked at -10°C.
The machine features a built-in self-check system that monitors real-time status parameters. The system will immediately stop operation and issue an alarm if abnormality happens.
User-Friendly Interface
The high-definition color touchscreen allows the operator to select treatment modes, treatment areas, and adjust energy output and other parameters. In addition, the screen clearly displays the current temperature and spot size, enabling the operator to monitor the device’s status in real time and ensure safe operation.
AI Hair Follicle Analysis
We have equipped this 3-in-1 hair removal machine with an AI system to assist with operation. It generates multidimensional skin condition reports for your clients and customizes parameter curves based on different skin tones and hair types.
Furthermore, the pore analysis feature provides clear images of pores magnified 50x or 200x. By analyzing and comparing results before and after hair removal, operators can better assess the client’s skin type and develop targeted post-treatment care plans.
Animation Navigation and Guidance
During actual use, the machine provides animated instructions to guide the operator’s treatment movements. Staff can observe the on-screen demonstrations to master the techniques for holding and maneuvering the treatment head, thereby improving precision. This also helps you avoid the time and cost associated with repeated staff training.
Applications of UNTLaser ’s 3 in 1 Hair Removal Machine
When used for hair removal, operators can directly adjust the energy density (J/cm²) through the touch-sensitive smart panel. The energy output will be consistent throughout the procedure, and the operator can directly observe the spot size and specific energy output values. Additionally, the smart system can predict hair removal results through real-time parameter analysis.
Our device offers excellent safety for skin rejuvenation. It revitalizes the skin by delivering stable thermal stimulation, and automatically stops once the target condition is reached, preventing additional irritation or burns to the client’s skin. Parameters can be set directly on the smart panel, ensuring flexible and convenient operation.
By selecting the SHR mode and the spot-overlay mode, you can also use the device for facial lifting treatments. Our SHR mode supports large-area heating of facial regions through the movement of the treatment head, effectively targeting the cheeks, double chin, platysma muscle, and cheekbone contours to achieve overall brightening and firming.
The stack mode shapes the double chin and jawline by delivering multiple energy pulses to the same location.
Product Data Sheet
- Specifications
- 3‑in‑1 Hair‑Removal Device VS Other Lasers
| cooling methods | 550W compressor |
| laser type | diode laser |
| wavelength | 808nm/808+755+1064nm |
| laser power | 3000/2400/1800W |
| power/bar | 200W |
| pulse width | 5-100ms |
| pulse frequency | 1-20Hz |
| spot sizes | Φ6/15*15mm/15*20mm/15*30mm |
| screen size | 15.6inch |
| AI skin analysis | supported |
| functions | hair removal,skin rejuvenation |
| handle warranty | 1 year |
| machine warranty | 2 years with lifetime after-sale services |
| Features/Types | 3-in-1 Hair Removal Device | Traditional diode laser hair removal machine |
| Functions | Hair Removal / Skin Rejuvenation / Vascular Treatment | Laser Hair Removal |
| Investment Value | Higher | Medium |
| If It is Suitable for Full-Body Treatment | Yes | Yes |
| Treatment Discomfort | Lower | Medium |
A practical guide to 3 in 1 Hair Removal Machine
Use this image-free guide to review the information and frequently asked questions already published for this machine category.
What to Review Before Choosing This Machine
Treatment fit
Review intended treatment areas, suitable users and the operating environment before comparing configurations.
Machine configuration
Compare energy delivery, cooling, handpieces, controls and maintenance requirements with the supplier.
Supplier support
Confirm training, warranty, replacement parts, OEM support and required compliance documents before purchase.
Frequently Asked Questions
How To Use Your 3-In-1 Hair Removal Machine?
Can Your 3-In-1 Hair Removal Machine Be Used For Treating Sensitive Areas?
How Does Your 3-In-1 Hair Removal Machine Work?
In fact, the core technology behind our 3-in-1 machine is still based on the principle of diode laser hair removal. The difference lies in the operator’s ability to select a specific mode to determine how the laser operates.
For example, the traditional laser hair removal mode involves a single release of laser energy to instantly heat the hair follicle; whereas the SHR mode releases low-energy laser pulses multiple times to gradually heat the hair follicles in a specific area. Combined with the continuous operation of the cooling system, this creates a low-pain or even pain-free hair removal experience for clients.
Does Your 3-In-1 Hair Removal Machine Support Continuous, Non-Stop Operation?
3-In-1 Machine Vs. Ipl Hair Removal Machine: What Are The Differences?
What Are The Benefits Of The AI Skin Analysis Function?
How To Select The Appropriate Operating Mode For Clients With Different Pain Tolerance Levels?
If your client has a low pain tolerance or requires hair removal treatment on sensitive areas, you can first choose the SHR Stack mode. This mode is gentler on the skin’s surface.
However, if your clients have requirements on the treatment speed or have coarser hair, the standard hair removal mode is sufficient to ensure effective results.