UNTLaser Smart FNC Max-A Portable Microneedling
- 0.1mm Ultra-Fine Microneedles
- 415nm Blue Light Therapy
- Negative Pressure Suction
- Tri-Frequency RF (1/4/8MHz)
- Smart Guidance System
Key Benefits of Smart FNC Max-A Portable Microneedling
The Smart FNC Max-A Portable Microneedling device uses negative pressure suction and insulated microneedle technology, delivering 1/4/8 MHz RF and 415 nm blue light. It stimulates collagen regeneration through minimally invasive treatment to achieve skin firming, wrinkle reduction, scar removal, and pore refinement. It also provides soothing and restorative hot and cold ice hammer therapy, along with tri-spectrum skin analysis, comprehensively addressing anti-aging needs for both the face and body.
- Vacuum interlock (25–70kPa) prevents RF output without skin suction.
- 99.99% EO-sterilized disposable cartridges, 0.5–4mm depth, 4 tip types.
- Cold hammer reaches 0°C in 30s and heats up to 50°C.
- 13.3″ Android 11 touchscreen with auto cartridge ID and OTA upgrades.
- Skin analyzer with UV, polarized, and white light for diagnosis.
- 50W RF, 1/4/8MHz, 0.1mm insulated/non-insulated microneedles.
One Pass, Total Skin Tightening & Rejuvenation
Firming & Lifting
Wrinkle & Scar Smoothing
Acne Relief & Pore Refinement
Multi-Frequency RF & 415nm Blue Light
Our device delivers three RF frequency bands, 1 MHz, 4 MHz, and 8 MHz, along with 415 nm blue light. The 8 MHz frequency targets the thinner dermis around the eyes and on the forehead, the 4 MHz frequency promotes collagen remodeling on the cheeks and neck, and the 1 MHz reaches deep into the thicker skin areas of the waist, abdomen, and thighs.
These three frequencies, together with blue light to inhibit Propionibacterium acnes, allow a single device to address a wide range of issues, from facial fine lines and enlarged pores to cellulite on the body and skin prone to inflamed acne. There’s no need to purchase multiple devices for different treatments.
Smart Android Touchscreen & Auto Cartridge ID
The 13.3-inch fully integrated touchscreen runs Android 11 and features animated setup guides, making it easy for new users to get started. When a disposable needle is inserted, the system immediately recognizes whether it’s a 10-pin, 36-pin, or 64-pin model and automatically matches the frequency to the treatment area, skipping the hassle of manual parameter adjustments.
The device includes a skin photo archive, allowing clients to view before-and-after comparisons directly. It also supports OTA remote updates, ensuring the system never becomes outdated, essentially giving owners a continually evolving, intelligent RF microneedling station.
Cold/Hot Hammer & Skin Analysis for Complete Care
In addition to the facial microneedling handpiece, the device also offers a body RF handpiece and a hot-and-cold ice hammer. The body handpiece addresses sagging skin and cellulite on the abdomen, thighs, and buttocks, as well as stretch marks.
The cold/hot hammer’s cooling function can drop to 0°C within 30 seconds, providing immediate post-treatment pain relief, reducing redness, and tightening pores. The heating function can reach 50°C, offering relaxation and soothing relief. The device also includes a tri-spectrum skin analysis probe that uses ultraviolet, polarized, and white light to detect inflammation, broken capillaries, and clogged pores, helping estheticians diagnose skin conditions and develop more precise treatment plans.
Visible Wrinkle Reduction Results
Before
After
Before
After- Product Specification
- Manufacturing Strength & Quality
- Post-Delivery Training & Technical
Product Specification
| Item | Specification |
| Screen | 13.3-inch fully laminated screen |
| Frequency | 1MHz / 4MHz / 8MHz (8MHz for the corners of the eyes, 4MHz for the cheeks and neck, and 1MHz for the body) |
| Power | 100W |
| Input Voltage | 110V / 220V |
| Input Frequency | 50Hz / 60Hz |
| Vacuum Negative Pressure | Max. 70KPa |
| Pressure | 25kPa-70kPa, adjustable according to customer needs |
| Microneedle Diameter | 0.1 mm |
| Needle Penetration Depth | 0.5 ~ 4.0mm (varies in different parts) |
| Needle Chart Combination | 10*1 / 10-needle / 6*6 / 36-needle / 8*8 / 64-needle / Nano |
| Product Size | SmartFNC MAX-A: 513×282×317mm |
| Package Size | 660×500×510mm |
| Product Weight | 20KG |
| Package Weight | 26KG |
Manufacturing Strength & Quality
Beijing UNT has an in-house R&D and manufacturing system. For over a decade, we have specialized in optoelectronic beauty equipment, implementing end-to-end quality control from circuit design to complete unit assembly. Our disposable needles have obtained CE hygiene certification, with an ethylene oxide sterilization rate of 99.99%; each needle is individually packaged in aluminum foil to prevent cross-contamination.
We maintain a long-term inventory of various machine molds and spare parts, support in-depth OEM/ODM customization, and offer immediate shipment from stock to shorten procurement cycles.We provide a 2-year warranty on the entire unit. Our global distributor network spans Asia, Europe, the Americas, Africa, and Oceania, providing one-stop technical solutions for equipment, accessories, and after-sales service to ensure stable and worry-free operations for our customers.
Post-Delivery Training & Technical
Inbuilt Animation Guidance
The device provides comprehensive animated step-by-step operation guides. New practitioners can complete treatments step by step by following the instructions on the 13.3-inch touchscreen, with no need for off-the-job training. This vastly reduces the learning curve and lowers staff training costs.
OTA Remote Upgrades & Real-Time Diagnostics
The system supports OTA (over-the-air) remote updates, just like a smartphone, ensuring features are always up to date. Common operational issues can be resolved remotely, reducing wait times for on-site engineers and ensuring treatment schedules remain unaffected.
Dedicated Support & Genuine Parts Supply
A dedicated after-sales team responds quickly using the device’s serial number (SN), and ample stock of genuine replacement parts minimizes repair time. All replacement supplies and components are factory-certified, preventing compatibility risks and ensuring long-term, stable operation of the equipment.
FAQ
It is recommended to space treatments 4 to 6 weeks apart to give the skin sufficient time for deep collagen and elastic fibers to regenerate naturally. A full course of treatment usually consists of 3 to 5 sessions; doctors will fine-tune the specific intervals based on the skin's healing rate and the specific concerns to be addressed.